DETAILING TROLLEY (WERKZEUGWAGEN) XL

COLE BRUSHES FOR LIQUID ELEMENTS DUAL ACTION POLISHERSReplacement Cole Brushes for the popular No Swirls Dual-Action-Polishers... Set of 2 pieces.Carbon Brushes will wear after a few years or when the DA-Polisher is heavily used.The DA-Polisher is not broken when it is making weird noise or will not run normally but the carbon brushes need to be replaced. How to replace the carbon brushes.- Replace always both carbon brushes in the machine.- First be sure to shut down the machine and remove the power cord from the wall plug.- Let the machine cool down for a few minutes to be sure you don’t burn your hand.- Remove the screw at the back of the machine, just below the speed control.- Gently remove the plastic housing-part of the machine and be sure everything stays in place   so it will fit the housing again when you put it together.- Locate both carbon brushes and remove them gently 1 by 1   (be aware of the spring, it can jump out)- After replacing both carbon brushes gently put back the plastic housing of the DA-Polisher and   screw it together.- Put the power plug in the wall connector and turn the machine on at speed 1 to check if everything   is working properly.- Let the DA-Polisher run for a minute so the carbon brushes are working perfectly.